Installation And Using Your Appliance; Safety; Use - Casselin CPC48 Mode D'emploi

5. Installation and using your appliance

5.1 Safety

DANGER ELECTRIC SHOCK!
Don't let the power supply cord touch hot parts
Don't let the power supply cord along a table or a counter
Never pour water in the tank when the appliance is hot: wait until it has cooled down.
Never pour hot water in the tank.
The electric safety of this appliance is ensured only if it is correctly connected to an
efficiently single phase socket
WARNING !
Operating particularly in heating phases your appliance can reach very high temperature
to avoid injuries don't touch hot parts. Do not use the appliance if it is damaged or if the
power cord has been damaged. If your appliance break down do not try to dismantle
and repair it yourself. Only use the original accessories supplied with your appliance.
DANGER ELECTRIC SHOCK!
The electrical safety of this appliance is ensured only if it is correctly connected to an
efficiently earthed system in accordance with electrical safety regulations. Make sure
this basic safety requirement has been complied with. If in doubt, have it checked by a
qualified technician. Before connecting your appliance make sure the specifications on
the rating plate correspond with those of your power supply.
Remove all protective foils and packaging material prior to usage

5.2 Use

Always fill the tank with cold water.
Make sure to use the minimum amount of coffee for brewing
- For appliance CPC48 around 20 cups i.e. 3 liters
- For appliance CPC60 around 20 cups i.e.3 liters
- For appliance CPC100 around 40 cups i.e. 6 liters
ADVICE
When you fill the tank of your appliance never exceed the high level mark
21