Honda Power Products TILLER F560 Manuel De L'utilisateur page 17

1. Engine oil level
Running the engine with insufficient oil can cause serious engine
damage.
1. Remove the oil filler cap and wipe the dipstick clean.
2. Insert the dipstick into the oil filler neck, but do not screw it in.
3. If the level is low, fill to the top of the oil filler neck with the
recommended oil.
Recommended oil
Use 4-stroke motor oil that meets or exceeds the requirements for API
service category SE or later (or equivalent). Always check the API
service label on the oil container to be sure it includes the letters SE or
later (or equivalent).
SAE 10W-30 is recommended for general use. Other viscosities shown
in the chart may be used when the average temperature in your area is
within the indicated range.
Using nondetergent oil or 2-stroke engine oil will shorten the engine's
service life.
OIL FILLER CAP
OIL FILLER NECK
14
AMBIENT TEMPERATURE
UPPER LIMIT