Elettro CF A00802.S Mode D'emploi page 5

• Items 824-825:
Check that the filter bag (28) is correctly inserted inside the aspirator and the filter-ring sticks perfectly to
−
the container (52) to avoid the coming out of the dust. Check that the filter is clean and dry.
Starting from the connector (35), connect in the following order: the outlet sleeve (13), the flexible hose
−
(1), the inlet sleeve (12), the bent extensions (20), the brushes or other tools.
For the different cleaning operations, use the different tools and accessories supplied with the vacuum
−
cleaner.
Attention ! Before connecting the vacuum cleaner to the power supply, check that the supply voltage is
−
the same as that indicated on the specifications plate of the machine.
Insert the pin plug of the vacuum cleaner in a 16A 230v (240v) 50Hz power supply socket and switch on
−
the vacuum cleaner choosing the number of motors according to the cleaning operation to be performed.
The aspirated dust and residues are deposited in the container (52), which can be easily emptied by
−
separating the head and the filter-bag (29) from the container. Before doing this operation, disconnect
the plug from the power supply.
PREPARING THE ASPIRATOR FOR WET VACUUM CLEANING
• Remove the filter bag (items 802-803: pos. 13-14; items 824-825: pos. 29).
• Connect the accessories following the same procedure as outlined in previous instructions and
connecting the appropriate tool (brush with rubber blades for items 824-825: pos. 17) to the extension
tube.
• Attention ! Before connecting the vacuum cleaner to the power supply, check that the supply voltage is
the same as that indicated on the specifications plate of the machine.
• Insert the pin plug of the vacuum cleaner in a 6A 230V (240V) 50Hz power supply socket for items 802-
803 or in a 16A 230v (240V) 50Hz socket for items 824-825. Then switch on the vacuum cleaner (for
items 824-825 switch on the number of motors you need).
• The aspirated liquid is deposited in the container. When it will reach the maximum level, the float (items
802-803: pos. 39; items 824-825: pos. 24) will block the suction operation.
• The container can be easily emptied by separating the head from the container. Before doing this
operation, disconnect the plug from the power supply.
5