Philips AVENT SCF287 Mode D'emploi page 10

ENGLISH
10
4 Put the plug in the wall socket.
5 Press the power-on button to switch on the appliance (Fig. 6).
Note: If you plug in the appliance after you have pressed the power-on button, the steriliser starts to heat
up immediately.
SCF287/SCF286
, The sterilising light lights up to indicate that the appliance starts operating.
When the sterilisation process is inished, the ready light goes on. After 3 minutes the ready
,
light goes out to indicate that you can now safely open the steriliser.
SCF285/SCF284
, The sterilising light lights up to indicate that the appliance starts operating.
When the sterilisation process is inished, the appliance switches off automatically.
,
6 Remove the lid.
Wait until the appliance has cooled down before you remove the lid.
Be careful, hot steam may come out of the steriliser.
7 Remove the bottles and other items from the basket. Use the tongs to remove the
smaller items.
Be careful, the sterilised items may still be hot.
Note: Make sure you wash your hands thoroughly before you touch sterilised items.
8 Unplug the appliance and wait until the appliance has cooled down completely.
9 Pour out any remaining water from the water reservoir and wipe the water reservoir dry.
Note: The appliance does not work for 10 minutes after a sterilising cycle; it needs to cool down irst.
Cleaning
Do not use abrasive or aggressive cleaning agents (e.g. bleach) or a scouring pad to clean this
appliance.
Never immerse the base, the mains cord or the mains plug in water or any other liquid.
Note: The steriliser is not dishwasher-proof. The baskets and the lid can be cleaned with hot water and
some washing-up liquid.
Always unplug the appliance and let it cool down before you clean it.
1
2 Clean the base with a moist cloth.
Clean the other parts in hot water with some washing-up liquid.
3
Note: After cleaning, store the steriliser in a clean, dry place.
4203_064_5714_5_DFU Booklet_A5_v2.indd 10 27/11/14 11:23