Utilisation And Intended Use - TECHNO-GAZ Multisteril Mode D'emploi

ENGLISH
1
The multi-function tank has been designed to cleanse, disinfect
INTENDED (by using suitable products) and dry medical, dental, easthetic
USE and veterinary tools by complying to the instructions given by the
appliance manufacturer .
The appliance uses ultrasound cleaning to clean areas which cannot be easily reached
through the manual clearing and without the risks caused by the handling of contaminated
tools.
The appliance can store up to 3 cycles which can be set by the operator.
The main steps are:
DISINFECTION
CLEANING
RINSE
DRYING
The multifunction tank shall be used exclusively to clean tools and
materials compatible with the ultrasound cleaning system and in general for
uses intended by the manufacturer.
2

UTILISATION AND INTENDED USE

Chemical disinfection is carried out exclusively when suitable
disinfectants are used in the percentages indicated by the
manufacturer.
This step reduces by more than 90% the microbial contamination.
Such step removes the organic residues which have not been
eliminated by the previous step.
This step removes any residue of disinfectant/detergent from inside
the tank.
After the rinsing the appliance can be dried to remove water
residues which might jeopardize the next sterilization cycle