UYAR iToast-1 Notice D'utilisation page 12

English
10
ATTENTION
The installation and maintenance of the equipment must be
carried out only by qualified personal!
■
Unpack the unit and remove all packing material.
Peel off the protective cover from the device. If adhesive
residue remains, remove them with a suitable solvent.
■
To handle the weight of the device place the unit on
a flat and safe place which is not heat sensitive.
■
Do never place the device on a flammable surface
(such as: table cloth, carpet, etc.) or in the vicinity of
combustible and flammable materials.
■
Do not place the unit near open fires, heaters or
other heat sources.
■
Maintain a minimum distance of 20 cm from all
sides.
■
Set the device so that the plug is accessible to dis-
connect the device quickly from the network if necessary