Table des Matières
Publicité
Headlight Wire
Fil électrique du dispositif d'éclairage
El cable de la luz
Lock Tabs Securely In Place
Mettre les loquets en position fermée
Asegurar las lengüetas estén
en su colocación apropiada
Nozzle Cover
Couvercle
de la base
Cubierta de la boquilla
Latches
Loquets
Pestillos
Cleaning Agitator
- 56 -
Note: If the agitator cover is not
installed correctly, you may experience
a loss of performance and possible
agitator vibration, etc.
➢ ➢ Make sure the headlight wires are
tucked securely in place.
➢ ➢ Replace the nozzle cover and
secure the latches.
➢ ➢ Clean agitator after every five uses
and every time the belt is replaced.
➢ ➢ Cut off any carpet pile and lint
entangled around agitator with a
pair of scissors.
➢ ➢ Remove agitator.
➢ ➢ Remove any string or debris located
on the end caps, washers or agitator
shaft.
➢ ➢ Reinstall agitator, agitator cover,
and nozzle cover
Publicité
Table des Matières
