Power Cord; To Operate Vacuum Cleaner - Panasonic MC-UG693 Manuel D'utilisation

Locking Notch
Encoche de
verrou
Hendidura de
fijación

Power Cord

Cordon
d'alimentation
Cordón
electrico
Quick Release
Upper Cord Hook
Crochet supérieur à
relâche rapide du cordon
Sujetador superior
de liberación rápida
del cordón
Power Cord
Cordon d'alimentation
Cordón electrico
Lower Cord Hooks
Crochets de
cordon inférieurs
Sujetadors inferior
del cordón
Attaching Power Cord

TO OPERATE VACUUM CLEANER

➢ ➢ Make sure the quick release upper
cord hook is in the upright position.
➢ ➢ Remove the wire tie from the power
cord.
➢ ➢ Lock the cord into place by forcing it
into the locking notch on the body of
the quick release upper cord hook as
shown.
➢ ➢ This helps keep the power cord out
from under the vacuum cleaner
agitator.
➢ ➢ Wrap the power cord around the
upper and lower cord hooks and lock
the power cord plug onto the power
cord.
CAUTION
Moving parts! To reduce the risk of
personal injury, DO NOT touch the
brush when vacuum cleaner is on.
Contacting the brush while it is
rotating can cut, bruise or cause
other injuries. Always unplug from
electrical outlet before servicing.
Use caution when operating near
children.
- 16 -