Genie 245CD Mode D'emploi page 13

switch back to the AUTO position. If necessary, repeat this step.
3. With the switch in the AUTO position and the open feed slot, you may now continue
the normal shredding process.
Technical data:
Shredding type:
Size of cut:
Shredding capacity:
Feed width:
Feed width for CDs/DVDs:
Input voltage:
Dimensions:
Waste basket:
Operating cycle:
Noise level:
Delivery:
Shredder GENIE 245 CD
Instruction manual
Cleaning:
Danger! Unplug the power cord before cleaning. There is a risk of electric shock!
Warning! The blades of the device are very sharp! Danger of injury!
1. Empty the drip trays regularly.
2. Clean the drip trays and paper cutter with a slightly dampened cloth and possibly
with a mild detergent.
3. Remove any residue in the cutting holes with a suitable object. Make sure that
while cleaning the plug is pulled in order to avoid injuries.
HANDLING THE GUARANTEE
- 13 -
Strip-cut
7 mm (paper), 3 pieces (CD/DVD or credit card)
5 pages DIN A4 (80g), 1 CD/DVD or credit card
220 mm
123 mm
230-240 volt alternating current, 50 Hz, 0.6 A
330 x 155 x 340 mm
ca. 12 l capacity
2 min. ON, 60 min. OFF
approx. 72 dB