Jimmy JV53 Mode D'emploi page 5

Packing List
Handheld
Part Name
Vacuum Cleaner
Quantity 1
2-in-1 crevice
Soft Brush
tool
1 1
Main-body Assembly
Connect the electric floor head with
metal tube
Hold the floor head with left hand, use right hand
to insert the metal tube vertically into floor head,
align with the conductive needle, press the
handle until a "click" sound is heard.(Picture 1)
Attention:Keep the handle and floor head in the same
direction, conductive needle shall align with the socket.
Charging base assembly
Fix the charging base on wall through screw
holes, so that the handheld vacuum cleaner can
be placed.(Picture 2)
Assemble battery pack and handheld
vacuum Cleaner
Battery pack assembly: use one hand to hold
handheld vacuum cleaner, one hand to hold
battery pack, align with the guide-track groove,
then install the battery pack until the "click"
sound is heard. Pull hard the battery pack
downwards, if the batter pack remain tight,
which means battery pack assembly complete.
(Picture3)
Attention:Please disassemble the battery pack from the
machine when the vacuum cleaner is not used for a long
time.Pack the machine and store in dry place, avoiding
direct sunlight or humid environment.
Battery Pack Electric Floor Head
1
Charging Base Metal Tube
1
1
2
Electric Mattress
Head
1 1
Adaptor
1 1
Metal Tube
Electric
Floor Head
Screw Holes
3
Groove
Battery Pack
2-in-1 Upholstery
Tool
1
Instruction
Manual
1
Conductive
Charging Base
Guide Track
Groove
3