Product Structure - Blumill Active R100 Mode D'emploi

PRODUCT STRUCTURE

Pull Pin
ASSEMBLY
1. Remove the rowing machine from the package and place it on the ground (As shown in Figure
A).
2. Hold the pull pin with your hand and pull it out. Rotate the pull pin to lower the column. Put it in
the designated position and replace the pull pin. (As shown in Figure B-C)
2021-07-22 OCG BluMill Rowing Machine ManualV02.indd 7 2021-07-22 OCG BluMill Rowing Machine ManualV02.indd 7
EN
Rear Support
7
29-07-2021 08:32 29-07-2021 08:32