Miscellaneous - Medisana IR 885 Mode D'emploi

Masquer les pouces Voir aussi pour IR 885:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 23
3 Operating / 4 Miscellaneous
GB
IMPORTANT NOTES
Do not exceed a radiation time of 15 minutes per session and 2 sessions a
day.
The infrared radiation emitted by the device is not suitable for tanning.
During use, an audible operating volume is emitted by the fan of the
appliance. This is normal and no sign of a malfunction.

4 Miscellaneous

4.1
Cleaning and
maintenance
Infrared lamp
Bulbs of a higher power than indicated on the rating plate must not be used. If the
infrared lamp is broken, contact the service centre. The following replacements for
the light bulb have to be used:
Osram Haloline 230V/300W, R7S or
Philips Plusline Pro Small 230V/300W, R7S.
A fitting replacement bulb can be reordered under MEDISANA item number 88259.
If the glass of the glass ceramic or the light bulb is broken, immediately discon-
nect the device and do not use the device anymore. Attention! Danger of injury
due to splinters of glass! Let the device cool down. Contact the service centre.
The light bulb is not part of the guarantee, it won`t be replaced free of charge.
16
Press TIMER-button
continue the treatment.
Adjust the length of the session according to your personal level of sensitivity,
however this should not exceed 15 minutes per session.
To switch off the device, press the ON-/OFF-button
7
LC-Display
will go out. The fan may be working for up to 15 minutes after
radiation has stopped in order to cool down the device.
Unplug the device from the mains when treatment has been completed.
Before cleaning the device unplug it from the mains and allow it to cool.
Clean the cooled-down device with a damp cloth and rub it dry.
Do not use aggressive cleaning and scouring materials.
Never immerse the device in water.
Please ensure that water does not penetrate the inside of the device. If this
is the case, do not use the device again until it is completely dry.
Store the device in a dry, cool place.
3
5
in standby mode to preset a new time duration and to
4
. The lamp and the

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

88257

Table des Matières