Attaching The Stand - Dell OptiPlex SX Guide De Configuration Et De Référence Rapide

3
NOTE: If you are installing the computer under a desktop or tabletop, first attach all cables,
and then attach the stand to the mounting plate (see "Attaching the Stand to the Mounting Plate"
on page 19).
Raise the captive screw and slide the chassis stand slat into one of three mounting slots
1
on the back of the computer.
When the stand is in place, tighten the screw.
2
NOTICE: If your computer is oriented under a desktop or tabletop and is in a high-vibration
environment, use the optional wall-mount bracket instead of the computer stand.
14
Setup and Quick Re ference Guide

Attaching the Stand