Publicité
Specification
1.
Each value should be gradually set in "Delay Touch Settings" after fulfillment of "Enable Delay
Touch". "Delay" is set to 40 and "Area" to 16.
2.
Enter count : It means how many times you click to approach the setting value within 3 seconds.
Then driver will install the function of "False touch rejection" where quick click or scratch will
be considered void except the touch point on the active area for quite a while.
3.
Leave count : "False touch rejection" is no longer effective when the click times within 5 seconds
is less than the setting number.
Utilisation du logiciel
48
Publicité
