Safety Instructions - Happy Life MASSAGESITZ Mode D'emploi

1 Safety instructions

Unit and Controls
Power supply
1
230 V~ 50 Hz / 12 V= , 800 mA
Seat massager
2
Size: approx. 110 cm x 48 cm
Motor arrangement
3
5 massage motors
for back, waist, shoulders and thighs
Power supply connection
4
Control unit
5
Heat button
6
red LED illuminates when heater is switched on
Speed button
7
adjusts the speed
Intensity button
8
adjusts the massage intensity
Select button
9
selects the massage zone(s)
Auto-select button
10
automatic massage zone selection
Function button
11
changes massage zone order
Pattern button
12
selects massage type
Power button
13
switches massage cushion on and off
6 status LED's
14
5 green LED's for massage zones
1 red LED for heater
Remote control pocket
15
for storing the remote control
8
Please read the following safety
instructions carefully before using the
seat massager, and keep the operating
instructions in a safe place.
The seat massager must only be used
in enclosed spaces!
Do not use the seat massager in
damp rooms (e.g. when bathing or
showering).
1.1 Thank you
Thank you for buying our product, and congratulations!
We are pleased that you have decided to buy a happy
life product. The happy life seat massager is a top
quality product. In order to achieve the desired success
and give your happy life seat massager a long service
life, we advise you to read the following usage and care
instructions carefully. Incorrect handling and improper
use can cause damage to the equipment and injuries to
the user.
1.2 Power supply
• Before connecting your unit to the power supply,
please ensure that it is switched off and that the
electrical voltage specified on the name plate matches
the voltage of your electrical socket.
• Keep the power supply, the cable, the control unit and
the seat massager away from heat, hot surfaces,
moisture and liquids. Never get hold of the power
supply with wet hands.
• The seat massager must be positioned so that the
power supply can be easily accessed at all times.
• Always unplug the equipment immediately after use.
• To disconnect the unit from the power supply, always
pull the plug out of the socket. Do not pull on the
cable!
• Do not carry, pull or turn the seat massager using the
control unit.
• Ensure that the cable will not cause tripping. The cable
must not be kinked, trapped or twisted.
• If you wish to use an extension cable, ensure that the
connected load corresponds with that of the unit.
Please contact your specialist trader if you have any
questions.