To Your Pc; Using Dkc01Hsm_01 When It Is Not Connected To Your Pc; Charging The Battery - LEXIBOOK DKC01HSM_01 Manuel D'utilisation

8. Click the "Save" button to save all changes.
9. Click "Set Logo Image" to select a start-up photo for the unit, just as you
would select any other photo. It will show up every time when you turn
the unit on. This picture is not displayed during the slideshow.
10. Click "Exit" to leave the program
USING DKC01HSM_01 WHEN IT IS NOT CONNECTED
1. Press and hold the "Mode" button for  seconds to turn on your digital
photo frame.
. Press "Mode" again to display the Options Menu and press the "Up" and
"Down" keys to scroll and navigate inside the menu. Press "Mode" again
to confirm.
. Select "Time" to display the date and time. This time is synchronized with
your PC clock. You cannot set the time from the unit itself.
4. In the time sub-menu, press the "Up" and "Down" keys to set "OSD ON"
or "OSD OFF" to show or hide the time and date on the screen of the unit
in picture mode.
5. Select "Slideshow" to change the time between photos from 0 to 1
seconds when using the slideshow function of the photo frame. Set it to
"0" to disable the slideshow function.
6. Select "Screen Save" to set the amount of time before the digital photo
frame turns off automatically. Use the "Up" and "Down" keys to change
the time from 0 to 1 minutes. Set it to "0" to disable the screen save
function.
7. Select "Brightness" to adjust the brightness.
8. Press the "Mode" button again to return to picture mode.
• Charge the unit by plugging the USB cable to your PC.
• The screen of the unit will display the battery symbol.
• When the unit is low in battery, the display will dim and blink before it
finally turns off.
1

TO YOUR PC

CHARGING THE BATTERY

Copyright © Lexibook 008