Publicité
Les langues disponibles
Les langues disponibles
EN
LOADING SLIDES AND NEGATIVES INTO
THE HOLDERS
Note: Handle slides and negatives with care.
Any dust , scratch or fingerprint will be visible on your saved images.
SLIDES
1. Open the film holder at the marked spot on the top and place the
slides into the dedicated slots, it should fit perfectly.
2. Close the slide holder and press the edges to lock it in place.
NEGATIVES
1. Open the negative holder at the marked spot on the top. With
the negative holder laid open place the negative into the holder so
the notches line up with the notches on the holder.
2. Close the negative holder and press the edges to lock it in place.
4
(1)
(2)
(1)
(2)
INSERTING HOLDERS INTO THE FILM SCANNER
Insert the negative or slide holder into the slot on the right
side of the film scanner as shown on the picture.
PROPER OPERATION SEQUENCE
1. Load slides or negatives into the corresponding holder
2. Insert the holder into the scanner
3. Connect the scanner to a power source (PC or power adapter)
4. Press the power button to turn on the scanner
5. Press the Scan button to start scanning
6. When done using the scanner, take the storage card out
7. Pictures can also be viewed on a PC via USB Connection
EN
5
Publicité
