Publicité
1
4. Install:
• Filler caps
CAUTION:
Rinse off any electrolyte from the battery
case and wipe the battery dry prior to
installation.
OIL PUMP AIR BLEEDING
1. Bleed:
• Air
Air bleeding steps:
• Place rags around the air bleed screw 1
to catch any oil that might spill.
• Fill the oil tank with the recommended
engine oil.
Recommended engine oil:
YAMALUBE 2-W oil
• Loosen the air bleed screw 1 two full
turns and make sure that both the oil and
air bubbles flow out.
• When there are no air bubbles left,
tighten the air bleed screw.
• Wipe up any spilt oil.
Air bleed screw:
3.4 N • m (0.34 kgf • m, 2.5 ft • lb)
If YAMALUBE 2-W is not available, Yamaha
Super 2 Stroke Engine Oil can be used.
CAUTION:
• Do not run the engine if oil does not flow
out the air bleed screw. Inspect the oil
lines for proper routing and make sure
there are no restrictions in the line.
• Fill the fuel tank with 50:1 premixed fuel
using the recommended engine oil during
the first full tank of operation.
• Use YAMALUBE 2-W oil. Using another
oil can seriously damage the catalytic
converter and other engine components.
– 12 –
E
Publicité
