Time Mode; To Set The Time / Date; To Set The Alarm; Compass - Oregon Scientific RA123 Mode D'emploi

The setting options are as follows: adjust sea level
pressure; toggle weather forecast icons.
5. Press TIME to confirm.
NOTE When sea level pressure is changed, the altitude
will adjust itself accordingly.

TIME MODE

TO SET THE TIME / DATE

1. Press TIME to navigate to Time mode.
2. Press and hold TIME to enter settings.
3. Press ALT / + or BARO / - to change setting.
4. Press TIME to confirm and move to the next setting.
The setting options are as follows: 12 / 24-hour
time; hour; minute; year; day-month / month-day;
month; day; temperature; altitude and barometer
measurement units.
5. Press TIME to confirm.
NOTE If no key is pressed for 30 seconds, the display
will return to previous mode.

TO SET THE ALARM

1. Press TIME to navigate to Alarm mode.
2. Press and hold TIME to enter settings.
3. Press ALT / + or BARO / - to change setting.
4. Press TIME to confirm and move to the next setting.
The setting options are as follows: hour; minute; alarm
ON / OFF.
5. Press TIME to confirm.
indicates that the alarm has been activated.
NOTE When the alarm clock is activated, it will sound
at the set time every day. Press any button to stop the
alarm for that day. The alarm clock is still active and will
set off again the following day.

COMPASS

ABOUT THE COMPASS

The compass shows the bearing in degrees due North
together with 16 cardinal points. The out circumference of the
display consists of 16 arrows that graphically indicate North.
The last lit segment indicates North as shown below.
6