Device Description; Initial Use - Beurer Barbers Corner HR 6000 Mode D'emploi

6. Device description

1
2
3
4
1. Stainless steel razor blade
2. Operating display
3. ON/OFF switch
4. LED display
5. Battery indicator (0-100%)
6. Travel lock indicator
7. Charging indicator

7. Initial use

You can operate the device with the battery as well as the supplied mains
adapter.
Charging the battery
You must fully charge the battery for 60 minutes before the first use. The oper-
ating period of the device is approx. 60 minutes when it is fully charged.
To charge the battery, proceed as follows:
1. Ensure that the device is switched off before charging the battery.
2. Connect the mains adapter to a suitable socket.
3. Plug the other end of the mains adapter into the connection so-
cket on the underside of the device. The charge indicator now
begins to flash. The battery indicator shows you the current
battery state in percent. As soon as the battery is fully charged,
the charging indicator goes out.
4. Once the charging process is complete, pull the mains adapter out of the
socket and the device.
Quick charging
If you have forgotten to charge the shaver before use, the quick-charge func-
tion helps. Connect the device to the power supply for this purpose. The device
will be ready for a complete shave using battery operation within 5 minutes.
9
12
5
6
7
8
10
11
8. Maintenance indicator
9. Micro USB connection socket
10. Protective cap
11. Length-adjustable comb attachment
12. Cleaning brush
13. Mains adapter
14. Storage bag
21
13
14