Step 3 - Plan - Belkin PUREAV AVU1500 Guide D'utilisation

Setup and Installation
Step 3 – Plan
There are several decisions to make to ensure everything is connected
and operating properly. When connecting your home theater equipment's
power cords to your AVU1500's power outlets, consider, for example, the
following questions:
• Which devices should always receive power (i.e., "always on") versus
having power cut on and off (i.e., "switched")?
• In the event of a power outage, which devices are less critical and can
lose power first, and which devices are most critical and should be
powered for as long as possible? These answers will determine which
devices should be plugged into shutdown Stage 1, 2, and 3 outlets.
• Should another device (e.g., preamp) act as a remote trigger and cause
other connected devices (e.g., amp, subwoofer) to power on and off?
These decisions are inter-related and you should consider these same
questions for each device you plan to power through your AVU1500. The
planning tables below can assist greatly; these same tables are provided
on the last page of this User Manual (see "Appendix: Setup Worksheets")
for you to detach and use more easily. A completed table will help you
greatly not only during the setup of your system, but also in testing your
system setup.
Equipment Type:
Use the table below to list every component you plan to have powered
by your AVU1500. Feel free to write over the few items we've listed as
possibilities.
Digital equipment
TV
DVD player
CD player
DVR (e.g., TiVo )
®
Cable box
Satellite box
Game consoles (e.g., Xbox
Home PC/Media Center PC
Analog equipment High-current
Tuner/receiver
Tape player
Phonograph
VCR
)
®
equipment
Amplifier
Subwoofer
24
®
®