Maintenance And Cleaning; General Cleaning And Servicing; Replacement Parts; Waste Disposal And Environmental - Grizzly EMH 2440 Traduction De La Notice D'utilisation Originale

GB

Maintenance and cleaning

Leave all work not described in
this manual to an authorised cu-
stomer service centre. Only use
original parts.
Wear hand protection when work-
ing on the blade.
Before starting to service or clean
the unit, turn off the unit, pull the
power plug, and wait until the blade
stands still. There is a risk of injury
and a risk to life from electric shock,
fire and rotating blades.

General cleaning and servicing

Do not spray water onto the
shredder. Electric shock hazard.
• Always keep the shredder, wheels and
air vents clean. Use a brush or cloth to
clean it, avoid cleaners and solvents.
• Always check that the shredder and
especially the guards are not worn
down or damaged but firmly attached
before use. Check that the nuts, bolts
and screws are tight.
• Check the covers and guards for dam-
age and improper attachment. If nec-
essary, change the components
• Keep the shredder in a dry place out
of children's reach. Do not cover the
shredder in nylon bags, as moisture
may develop.
78

Replacement parts

Spare parts and accessories
can be obtained at
www.grizzly-service.eu
Replacement parts can be ordered di-
rectly from our service centre ("Grizzly
Service-Center"). In your order, quote the
equipment type and position number in
the exploded view.
Screw........................................ 91093082
Blade ........................................ 91093083
Waste disposal and
environmental protection
Be environmentally friendly. Return the
tool, accessories and packaging to a recy-
cling centre when you have finished with
them.
Machines do not belong with do-
mestic waste.
Hand over the device at an utilization lo-
cation. The plastic and metal parts emplo-
yed can be separated out into pure mate-
rials and recycling can be implemented.
Ask your Service Center about this.