Using The Camera For Other End Devices; Access To The User Account Via The Web Portal (Pc); Maintenance And Cleaning; What If There Are Problems - Inanny NC112 Manuel D'utilisation

8.7 Using the camera for other end devices

To use the camera with other end devices, you must log in with the same username +
password as your user account.

8.8 Access to the user account via the web portal (PC)

It is possible to access your user account via the web portal.
You will have received a link to the web portal automatically via e-mail after setting up the
camera.
Note
The transmission image and the timeline can only be displayed via the web portal. Other
functions/settings options (such as the two-way communication) are not available.

9. Maintenance and cleaning

The service life of the camera depends on careful use:
IMPORTANT
•
Protect the camera from knocks, damp, dust, chemicals, drastic changes in
temperature, electromagnetic fields and nearby sources of heat (ovens, heaters).
•
Never use the camera in a damp environment.
•
Clean the camera with a dry cloth. Do not use any abrasive cleaning products.

10. What if there are problems?

IMPORTANT Forgotten password
If you have forgotten your password, tap "Forgot password" in the app and enter your
e-mail
address. A new password will be sent to your e-mail address.
Problem
No connection can be established
to the camera.
No connection can be made to
the camera.
There is no alarm warning sound on the
smartphone/tablet.
Videos cannot be recorded on the
end device.
I cannot log into my user account after
registration.
I receive the error message "Your
e-mail ID is not registered"
Solution
Switch your WLAN router off and back on again. Go
through the registration again.
Check that the camera is within range of the WLAN
router. If the function light flashes, place the camera
closer to the WLAN router for better reception.
Check whether your alarm settings have been
activated.
Videos can only be saved on Android™ devices.
Check that the user name and password are correct.
Make sure that you have registered with us. First tap
"Create user account"
9