Imetec F7805 Instructions D'utilisation page 15

SEFUL TIPS
The quick understanding of the modes of use of the hair brush will
allow establishing the exact application time for obtaining the desired
effect.
• Ensure the hair is dry, clean and without any trace of hairspray,
hair mousse or gel.
• Comb the hair ensuring there are no knots.
• Start straightening from the nape of the neck, proceed on the
sides and finish on the forehead.
• During use, when the brush heats and cools, position the
appliance on a smooth and heat resistant surface.
• While straightening, be careful not to near the brush too much to
the sensitive parts of the face, ears, neck or head.
• Leave the brush cool down completely when finished, before
putting it away.
PREPARING THE HAIR
• Wash hair as normal and comb removing knots.
• Dry the hair and brush from the roots to the ends.
USER INSTRUCTIONS
• Connect the power cable (6) to the mains power supply.
• Press the O/1/ion button to turn the brush on: the brush is on
when the button is in position 1 and the button LED lights up (4);
the brush is on together with the ionizer when the button is in
position 2 and the relative LED lights up (2).
• Wait a few minutes for maximum performance and the desired
style to be achieved.
• Take a lock of hair, the same width of the barrel of the brush (1),
wrap it around and keep it in place for a few moments.
• Once the hair is styled, switch off the appliance from the button
(5) and disconnect the brush from the socket.
using the brush; this is caused by the evaporation of excess
moisture in the hair.
3382_F78__.indd 13
WARNING! DO NOT use this appliance
near bathtubs, showers, basins or
other vessels containing water. Never
place the appliance into water.
WARNING! Risk of fire. DO NOT use
flammable products on hair or on the
appliance.
NOTE: It is normal for steam to develop when you are
13
EN
18/01/19 09