Cleaning And Care Of The Unit; Technical Specifications - Beurer HS 40 Mode D'emploi

Note
• Automatic shutoff:
For your safety, the straightener shuts off automatically after 30 minutes.
After use
> Press the on/off switch for two seconds [5]. The straightener shuts off.
> Place the straightener on a non-combustible surface.
> Remove the plug from the socket after each use.
> Let the unit cool down.
> Do not wind the mains cable around the unit!
> Store the unit in a dry place that is out of reach of children.
> The unit can be hung on a hook by the hanging eyelet [7].

7. Cleaning and care of the unit

Cleaning
Warning
• Always pull the mains plug out of the socket before cleaning the device. Risk of electric shock!
• Ensure that no water gets inside the device. Risk of electric shock!
• Do not clean the device with highly flammable liquids! Risk of fire!
Notes
• Your device is maintenance-free.
• Protect the device from dust, dirt and humidity.
• Do not clean the device in a dishwasher.
• Do not use any aggressive, caustic, abrasive or corrosive cleaning products or hard brushes.
• The casing of the hair straightener and the hot plates may be cleaned with a soft cloth dampened
with warm water.

8. Technical specifications

Weight
Power supply
Power consumption
Temperature range
Safety class
Approx. 340 g
220-240 V ~, 50/60 Hz
40 W
120-220 °C
II
16