Epson ELPAP07 Guide De L'utilisateur page 10

Installing This Unit
See the "Installing the Wireless LAN Unit" sheet or the projector's "User's
Guide" for installing this unit.
Connecting to the Network
See the "EasyMP Network Projection Operation Guide" supplied with the
projector to connect the projector to a network using wireless LAN.
Reading the Wireless LAN Indicator
Depending on your projector, the
illustrations and the actual projector may
differ. See the "User's Guide" supplied with
the projector for more details.
: Flashing
Status
This unit is not installed in the projector. Or
Wireless LAN Power is set to Off from the
projector's configuration menu.
This unit is installed in the projector and is in
operation.
This unit is communicating on a network.
Supported products:
This unit can be connected to the following products in accordance with
IEEE 802.11b, 802.11g, and 802.11n*.
•
Computers with a built-in wireless LAN function
•
Access points
However, available communication modes may be restricted by the
projector using this unit or the specifications of the connected device.
* You cannot use IEEE 802.11n in the Russian Federation and other
neighboring countries.
: Lit : Off
9
Wireless LAN Indicator
Green
Green (Flashing
quickly)