Televes COFDM-PAL Manuel D'utilisation page 48

User manual
To modify a parameter you must press
untilthe desired parameter flashes on an off.
Then you can change the value using
and
c.- Service menu
The name of the selected service is displa-
yed along with the number of available ser-
vices in the multiplex. By pressing
buttons you can change the selected
service.
d.- Audio menu
The next menu shows the selected audio
channel (and the number of audio services
available) and the audio mode.
Los modos mono seleccionables son: R+L,
Right, Left:
L + R It can be modulated (L+R)/2
(mono mode).
and
Right Only the R channel is modulated
Left Only the L channel is modulated
To carry out the modification the
must be pressed until the desired parameter
flashes. Then the correspondent field can be
modified using the and
e.- Monitor menu
This menu shows the following information:
estimation of the BER (bit error rate before
Viterbi), the firmware version of the unit and
the firmware version of the MPEG decoder.
48
key
keys.
COFDM-PAL