Horizon Hobby Spektrum iX20 Guide De Démarrage page 5

Powering On/Off the iX20 Transmitter
The iX20 features a push button ON/OFF switch.
1. To power on the transmitter, push
and hold the power button for
several seconds until the blue
LED fl ashes and the LCD screen
displays the start up screen.
The orange LED indicator lights
immediately, indicating the
transmitter is sending an RF signal.
Similar to other smart devices,
startup takes ~30 seconds. Once startup is complete, the
Spektrum Airware ™ application will launch automatically,
which requires another 15 seconds (approximately).
2. To power off the transmitter, push and hold the power
button for several seconds until the Power Off / Reboot
prompt shows on the screen.
3. Press "Power Off" to shutdown OR "Restart" to reboot the system.
Navigation
The iX20 transmitter is built on the Android operating system
and features a large color touch screen display. Navigate the
iX20 using the same actions and gestures as those used to
operate any other Android device.
To navigate, use your fi nger to tap, swipe and drag icons and
menus found on the display.
Long Press for OK: When you see this icon,
press and hold for approximately 2 seconds to
accept the selection.
Android Navigation
™
The Spektrum AirWare application will hide the Android
home screen navigation icons.
To access the Android navigation icons at anytime, swipe up
from the bottom edge of the screen. Press the circle icon to
go to the Android home screen.
1. ALL APPS: Contains applications loaded onto the iX20.
2. BACK: Return to previous screen.
3. HOME: Return to the home screen.
4. OVERVIEW: Allows switching between and closing any of
the running applications.
Notifi cation Screen
1. Swipe down from the top of the screen once to exit full
screen mode and bring the home screen navigation icons
to the front.
2. Swipe down a second time to roll down the Notifi cation
Screen for quick access to:
• Settings
• User Info
• Brightness
• Wi-Fi
• Bluetooth
• Landscape
• Location
• Cast Screen
TIPS:
• Press the power button once to put the display to sleep.
The radio will continue to transmit normally while the
screen is in sleep mode. Press the power button again to
wake up the screen.
• Double pressing the power button will open a window
allowing you to select RF On/Off, screen On/Off,
WiFi On/Off, Bluetooth On/Off or Quick Sleep to put the
system in sleep mode.
• It is recommended you use the sleep mode rather than
powering the system off on fl ying days.
• The transmitter may be left in sleep mode for as long as
1-2 days safely. Power off the transmitter if you don't plan
on using it within 2 days. Failing to power off the transmitter
will result in continuous discharge of the battery.
5
Home
2 3 4
1