SCANGRIP CANVIK PLUS 11.0005 Instructions D'utilisation page 4

GB
USE AS INTENDED
The coil spring compressor is exclusively for compressing and
expanding McPherson strut springs for maintenance. The compressor
is not for removal of struts from any vehicle. See details in "Operation
Advice". Suitable jaws must be used. Any other or further use is consid-
ered not as intended.
SPECIFICATIONS
McPherson Coil Spring Compressor
Including 2 jaws Ø80-120 mm and 2 jaws Ø80-200 mm and a safety wire
Item no.:
Maximum load:
Minimum distance between jaws:
Maximum distance between jaws:
Spring capacity with standard jaws:
Length body:
Weight body:
Weight jaws 10.0010:
Weight jaws 10.0008:
Standard Accessories:
- Jaws fitting springs diameter of Ø80-200 mm
with polyurethane insert
- Jaws fitting springs diameter of Ø80-120 mm
with polyurethane insert
Incl.
ø80-120mm
ø80-200mm
11.0005
18000 N (1800 kg)
65 mm
364 mm
Ø80-200 mm
500 mm
5.4 kg
3.4 kg (pair)
2.8 kg (pair)
10.0010
10.0008