Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
16
4
Add salt:
For convenience, the water
softener has been designed
to accommodate tablet/pellet
salt. Simply pour into the salt
compartment.
IMPORTANT:
Only use salt manufactured for
use in water softeners.
Do not load salt behind the
water softener tanks.
Do not use rock or granular salt
in your system. They contain
impurities that can interfere with
performance and could invalidate
the Limited Warranty.
5
Fit the lid:
Replace the lids and check
plumbing for any leaks. The
installation is now complete.
Kinetico Premier Plus Water Softener Installation and User Manual
Useful
information
1
How do I correct
the water level if it
sits higher than the
recommended 50mm
above the salt grid?
Check that the brine valve is
seated firmly on the base of the
cabinet.
2
Why am I experiencing
varying levels of
hardness?
The softener will provide soft
water immediately; however, until
mains water has been displaced
from the pipework, storage tanks
and hot water system, you will
experience varying degrees of
hardness.
Depending on your water system
and water usage, this may take a
few weeks
to clear.
It is also advisable to check that
the by-pass valve is closed, when
not using the Kinetico blending
by-pass valve.
Publicité
Table des Matières
