Publicité
Filling
Release pressure by lifting the safety
valve (4), unscrew container (1) and
fill in the required quantity. The maxi-
mum mark point of the container must
not be exceeded. Mix the fluids well
so that in particular all powderlike
substances are completely dissolved.
Pumping and Spraying
Before unscrewing the container
check that the O-ring (2) is seated
correctly.
Screw the grip (3) tightly onto the
container and start pumping. The
optimum working pressure is reached
when the built-in safety valve (4)
opens. For spraying press the operat-
ing switch (5).
The GARDENA Pressure Sprayers
are designed for distribution of fluid,
solvent-free insecticides
1)
killers
, fertilisers
1)
agents
, car wax and polish
house and garden.
They are not to be used in public
facilities, parks, sport grounds, on
roads, in agriculture or forestry.
It is essential to observe the manu-
facturer's operating instructions to
ensure the unit's proper functioning.
The operating instructions also con-
tain hints for service, maintenance
and repair.
To avoid injury to persons the
A
GARDENA Pressure Sprayers
may be used only for distributing
the fluids indicated by the manu-
1)
, weed-
1)
, window cleaning
1)
around
11
Publicité
