weasy WH500 Manuel D'utilisation page 10

dry the filters and do not in any case use a hair dryer.
Only put the device back together once all parts are
■
completely dry!
Do not use any corrosive or abrasive cleaners to clean
■
the housing. They could damage the surface. If needed,
clean the housing with a damp, soft cloth.
Emptying the dust bin and cleaning the filters
1. Take the dust bin off of the device by turning it approx.
one quarter revolution counterclockwise and pulling it out.
2. Push the release button on the dust bin and empty the
dust bin over a waste bin.
3. Pull the fi lters out of the dust bin: Turn the dust fi lter
approx. one quarter turn counterclockwise and remove
both fi lters. Tap out the fi lters over a waste bin.
4. If necessary, clean the dust bin and the fi lters with
clean, lukewarm water.
5. Allow all parts to dry completely before assembling
them.
ATTENTION: Do not in any case insert the fi lters if
they are still moist. Reverse the steps to assemble them.
Make sure that the catches on the dust bin are inserted
into the corresponding recesses on the main unit.
Otherwise, the dust bin will not correctly lock into the
device.
6. Store the device and accessories in a dry area out of
the sun that is not accessible to children and animals.
If you do not want to use the device for a prolonged
period, remove the rechargeable battery to stay on the
safe side (see section "Removing the rechargeable
battery").