Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Model
Magnification
Real field of view
Apparent field of
view*
Field of view at
1,000m/yds. (Approx.)
Exit pupil
Relative brightness
Eye relief
Length
Weight
Structure
* The number calculated by the formula [tan ω ' = Γ x tan ω ]: Apparent field of view: 2 ω ' , Magnification: Γ , Real field of view: 2 ω
** At lowest magnification.
Water-resistant models (Eyepiece lens with main body.):
In normal use, there will be no water penetration (As tested by water equivalent to more than 1mm per minute,
falling from a height of more than 200mm for a duration of 10 minutes).
Drops of water and other types of moisture will not damage the Fieldscope, but be sure to observe the
following during use:
1. The unit is neither waterproof nor airtight, so it should not be held under running water or used in rainy
conditions.
2. Movable parts (focusing knob, eyepiece, etc.) of the Fieldscope should not be adjusted in wet conditions. If
you notice moisture has accumulated on the product's surface, gently wipe it off immediately.
Eyepiece Lenses Specifications
SEP-25
with 60/60 A with 82/82 A with 60/60 A with 82/82 A with 60/60 A with 82/82 A
20x
25x
2.8°
2.2°
51.3°
48m/144 ft. 38m/115 ft. 40m/120 ft.
3.0mm
3.3mm
9.0
10.9
17.6
50mm/2.0 in.
135g/4.8 oz.
Water resistant when attached to Fieldscope body
SEP-38W
30x
38x
2.3°
1.8°
62.1°
31m/92 ft. 45m/136 ft.** 36m/109 ft.**
2.0mm
2.2mm
4.0
4.8
19.0
63mm/2.5 in.
185g/6.5 oz.
SEP-20-60
16-48x
20-60x
2.6°**
2.1°**
39.9°**
3.8mm**
4.1mm**
14.4**
16.8**
16.9**
80mm/3.1 in.
225g/7.9 oz.
En
Es
Fr
Pt
11
Publicité
Chapitres
Table des Matières
