Getting Started; Charging The Device; Turning On; Turning Off - freeVoice FBT650 Manuel D'utilisation

E

Getting Started:

Piease fully charge headset after removing it from the package
before beginning the pairing process.

Charging the device:

1 Insert the USB charging cable into an active USB port.
2 Insert the micro USB into the socket on the charging station or
directly into your heasdset.
Turning on/off:
Slide the ON/OFF switch to the middle position.

Pairing the Headset:

«Pairing» is the connection of your headset with Bluetooth technolo-
gy with a Bluetooth-enabled device. This process must be executed
only once for each new device become.
Slide the ON / OFF switch to the «pairing position» (Bluetooth sym-
bol) and hold it for 2 seconds until the LED light starts to flash blue.
Open the menu Bluetooth on your mobile phone and select «Space»
to mconnect. After successful pairing, the blue LED light goes out
and flashes then blue at intervals of 8 seconds.

Pairing a second device:

This headset includes a multipoint function for simultaneous connec-
tion of two devices.
Repeat the same procedure as when pairing the first device. If the
second device is connected, you must re-activate the space in the
Bluetooth menu of the first device.
15