LRP electronic ANTIX MT-1 Mode D'emploi page 5

USER MANUAL
ANTIX
by lrp
BEST-NR. 180100
TOOLS
To accomplish maintenance- and setup-work at your Antix MT-1, we recommend to
use the following tools:
Socket driver, 7mm; cross slot screwdriver small and large
#65721 #65771
REPAIR PROCEDURES & WARRANTY
All products from LRP electronic GmbH (hereinafter called "LRP") are manufactured according to
the highest quality standards. LRP guarantees this product to be free from defects in materials or
workmanship for 90 days (non-european countries only) from the original date of purchase veri-
fied by sales receipt. This limited warranty doesn´t cover defects, which are a result of misuse,
improper maintenance, outside interference or mechanical damage. This especially applies on
already used batteries or batteries, which show signs of heavy usage. Damages or output losses
due to improper handling and/or overload are not a product fault. Signs of wear (loss of capacity)
after intensive usage are also no product fault. Furthermore this includes the following points:
- Crash damage
- Component failure or premature wear as a result of crash damage
- Water damage or problems resulting from water/moisture intake
- Painted canopies, after they have been used
LRP does not do a warranty change of the whole product, once the product has been used. Do
not send in the whole product. Only send in the defective parts, on which you want to claim
warranty. If the whole product is send in, LRP will charge a service fee for the Disassembly and
Assembly of the product at our discretion.
To eliminate all other possibilities or improper handling, first check all other components in your
model and the trouble shooting guide, if available, before you send in this product for repair.
If products are sent in for repair, which do operate perfectly, we have to charge a service fee
according to our pricelist.
With sending in this product, the customer has to advise LRP if the product should be repaired
in either case. If there is neither a warranty nor guarantee claim, the inspection of the product
and the repairs, if necessary, in either case will be charged with a fee at the customers expense
according to our price list. A proof of purchase including date of purchase needs to be included.
Otherwise, no warranty can be granted. For quick repair- and return service, add your address
and detailed description of the malfunction.
If LRP no longer manufactures a returned defective product and we are unable to service it,
we shall provide you with a product that has at least the same value from one of the successor
series.
The specifications like weight, size and others should be seen as guide values. Due to ongoing
technical improvements, which are done in the interest of the product, LRP does not take any
responsibility for the accuracy of these specs.
LRP-DISTRIBUTOR-SERVICE:
check www.LRP .cc
KA00106 © LRP electronic GmbH 2016
2.4GH
#65751
rTr
z
ENGLISH
GENERAL NOTES
WEEE NOTES
This symbol indicates that this product is not to be disposed of with your household
waste, according to the WEEE Directive (2012/19/EU) and your national law. This pro-
duct should be handed over to a designated collection point, e.g. on an authorised one-
for-one basis when you buy a new similar product, or to an authorised collection site
for recycling waste electrical and electronic equipment (EEE). Improper handling of this
type of waste could have a possible negative impact on the environment and human
health due to potentially hazardous substances that are generally associated with EEE.
At the same time, your cooperation in the correct disposal of this product will contri-
bute to the effective usage of natural resources. For more information about where you
can drop off your waste equipment for recycling, please contact your local city office,
waste authority, approved WEEE scheme or your household waste disposal service.
CE NOTES
Hereby, LRP electronic GmbH declares that this product is in compliance with the es-
sential requirements and other relevant provisions of the european directive 2014/30/
EU.
This item is in accordance with directive 1999/5/EC. For the declaration of conformity
visit: http://www.LRP .cc/CE
The user is cautioned that any changes or modifications not expressly appro-
ved by the party responsible for compliance could void the user's authority to operate
the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interferen ce
to radio communications. However, there is no guarantee that the interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that of the receiver.
Consult the dealer or an experienced radio/TV technician for help.
BATTERY DISPOSAL NOTES:
Batteries and accumulators used in this product are to be disposed of separately from
your household waste. Batteries and accumulators must not be disposed of as un-
sorted municipal waste. Users of batteries and accumulators must use the available
collection framework for the return, recycling and treatment of batteries and accumula-
tors. Customer participation in the collection and recycling of batteries and accumula-
tors is important to minimise any potential effects of batteries and accumulators on the
environment and human health due to substances used in batteries and accumulators.
LRP electronic GmbH
Hanfwiesenstraße 15
73614 Schorndorf
Deutschland