Extract From The Spare Parts List; Accessories - Makita DES 300 Instructions D'emploi

Guarantee
MAKITA guarantees the highest quality and will therefore reimburse all costs for mending through replacement of damaged parts as
a result of material or production faults, which occur within the guarantee time after purchase.
Please, note that in some countries particular guarantee conditions may exist. In case of any doubts, please, contact your salesman
who is responsible for the guarantee of the product.
We ask for your understanding that we cannot accept any responsibility for damage caused by:
• Disregard of the instruction manual.
• Non-performance of the required maintenance and cleaning instructions.
• Normal wear and tear.
• Obvious overload due to permanent excess of the upper limits of capacity.
• Use of guide bars and saw chains which have not been approved.
• Use of guide bar and saw chain lengths which have not been approved.
• Use of force, improper use, misuse or accidents.
• Damage caused by overheating due to dirt obstructing the cool air supply at the motor case.
• Use of unsuitable spare parts or parts which are not original MAKITA parts, as far as they have caused the damage.
• Use of unsuitable or old oil.
• Damage related to conditions arising from lease or rent contracts.
• Works on the chain saw by unskilled persons or performance of inappropriate repairs.
Cleaning, servicing and adjustment works are not covered by the guarantee. All repairs covered by the guarantee are to be
performed by a MAKITA service centre.
Important information for order replacement saw chains and guide bars!
If using a guide bar with a 1.3 mm (.050") groove width, only use the matching saw chain with a 1.3 mm (.050") drive elemant strenght.
1.3 mm (.050") groove width guide bars are marked with this symbol

Extract from the spare parts list

Use original MAKITA spare parts only. For performance of repairs and for replacement of other
components your MAKITA service centre should be consulted.
Included in the delivery inventory
1
7
Pos. MAKITA No. Qty. Denomination
1 205 114 201 1 Oil tank cap compl.
2 923 208 004 1 Fastening nut
3 205 213 670 1 Sprocket guard with brake
4 442 030 661 1 Sprocket nose bar 30 cm (12")
4 442 035 661 1 Sprocket nose bar 35 cm (14")
4 442 040 661 1 Sprocket nose bar 40 cm (16")
4 444 038 141 1 Sprocket nose bar 38 cm (15")
5 528 092 646 1 Saw chain 3/8", 30 cm
5 528 092 652 1 Saw chain 3/8", 35 cm
5 528 092 656 1 Saw chain 3/8", 40 cm
5 532 484 064 1 Saw chain .325", 38 cm
6 952 100 633 1 Chain protection cover (30-40 cm)
7 941 713 001 1 Universal wrench SW 13
18
5
2
3
4
300 350 400
1 1 1
1 1 1
1 1 1
1
1
1
1
1
1
1 1 1
1 1 1
.
Accessories (not included in the
delivery inventory)
1
2
6
380 Pos. MAKITA No.
1 1 953 100 090 1
1
953 100 071 1
1
2 953 004 010 1
3 953 003 090 1
953 003 100 1
953 003 070 1
1
4 953 003 060 1
5 953 030 010 1
953 030 030 1
1
1
1
3
4
5
Qty. Denomination
Chain gauge 3/8"
Chain gauge .325"
File handle
Round file ø 4 mm
Round file ø 4,5 mm
Round file ø 4,8 mm
Flat file
File holder compl. 3/8"
File holder compl. .325"