Kuppersbusch IKE 150-2 Instructions De Montage Et D'emploi page 29

9. Remove the squares and mark a distance of 8 mm
from the outer edge of the door where the nail must
be fitted (K).
10. Place the small square on the guide again and fix
it with the screws supplied.
Should the alignment of the furniture door be
necessary, use the clearance of slots.
At the end of this procedure, it is necessary to
check if the door of the furniture closes properly.
11. Fix cover (Hd) on the small square (Hb) until it clips
into place.
GB
29