Stand Alone-Operation; Sound Control; Dmx-Controlled Operation; Dmx-Protocol - Eurolite Led Dmx Rgb Flash Mode D'emploi

OPERATION
Connect the effect to the mains and switch it on via the POWER-switch.
The device has two operating modes. It can be run in Stand-Alone-mode or in DMX-controlled mode.

Stand Alone-operation

In Stand Alone-mode you can do without a controller as the LED DMX RGB Flash features a built-in
microphone, which provides automatic sound control. Via the DIP-switches you can choose among three
settings:

Sound Control

In order to select Sound Control, set DIP-switch 10 to ON (no DMX operation possible). Strobe effects are
sound-controlled. You can adjust the sensitivity with the rotary SENSIVITY-control.
Fade Colors
In order to select Fade Colors, set DIP-switch 11 to ON.
Chaser
In order to select the Chaser function, set DIP-switch 12 to ON.

DMX-controlled operation

You can control the projectors individually via your DMX-controller. Every DMX-channel has a different
occupation with different features.
Set DIP-switch 10 to OFF.

DMX-protocol

Channel DMX Value Characteristic
1
2
3
4
11-255
5
0-255 R 0-100 % Dimmer
0-255 G 0-100 % Dimmer
0-255 B 0-100 % Dimmer
0 OFF
1-5 Sound control
6-10 ON (no strobe effect)
Strobe speed (increasing)
0-255 0-100 % Master Dimmer
19/38 52201830_V_1_1.DOC