Kenwood KCA-RC107MR Mode D'emploi page 4

Before Installation
Connectable model
• KMR-700U
¤
• Mounting and wiring this product requires skills and
experience. For safety's sake, leave the mounting and wiring
work to professionals.
• Do not install the unit in a spot exposed to direct sunlight
or excessive heat or humidity.
• Do not use your own screws. Use only the screws provided.
If you use the wrong screws, you could damage the unit.
• After installing the unit, check to make sure that electrical
equipment such as the signal lamps and gauges operate
normally.
English
(as of February 2009)
Connection
When connecting single KCA-RC107MR
KCA-RC107MR
Marine Receiver
When connecting two KCA-RC107MRs
KCA-RC107MR
Marine Receiver
When connecting three KCA-RC107MRs
KCA-RC107MR
Marine Receiver
⁄
• You can use the extension cable CA-EX7MR (7m) or
CA-EX3MR (3m) to extend the wiring cable up to 15
meters, if the installation positions of the receiver and KCA-
RC107MR are long distance apart.
Remote control input
CA-Y107MR
(Optional
accessory)
Remote control input
CA-Y107MR
(Optional
accessory)
CA-Y107MR
(Optional
accessory)
Remote control input