Philips SRU8008 Mode D'emploi page 11

SRU8008_IFU_bundel 1 v09.qxd
4.1.2 Fix a Key
If a key or extra function is not working properly with your device, you
can first of all try to assign that key's signal to the SRU8008. In case that
does not work, you can copy that key's signal from your original remote
to the SRU8008.
D Note
When you use the 'Fix a Key' option, new data overwrites the data
that is currently stored for that key.
Go to Setup - Devices, select Fix a key and press
1
Select the device for which you want to fix a key.
2
The SRU8008 automatically checks if the brand of this device is
known in its database.
If the brand of your device is known, press and hold the key for
3
which you want to assign the signal.
The SRU8008 sends out different signals to your device.
When the device reacts, immediately release the key and follow the
4
instructions on the SRU8008.
The key is assigned and fixed.
-or-
If the brand of your device is unknown or the device does not
react to any of the signals, copy the key's signal from the original
remote:
Confirm you have the original working remote ready.
3
Position the SRU8008 and your original remote control as shown.
4
Select the key or extra function you
5
want to fix.
To select extra functions:
6
Press
1
Select the function with the
2
rotary wheel and press
Follow the instructions on the SRU8008.
7
The key is copied and fixed.
D Note
All keys can be fixed except:
•
•
•
Getting the Most out of Your SRU8008
03-12-2007
.
.
11:35 Pagina 11
.
0.80 - 2 inches
2-5 cm
9
9
11