Velleman WIFIR3 Mode D'emploi page 14

10.2 Configure the access point in the web management tool
1. Perform steps 1 to 6 as described in section 7.3.
2. Select Standard Wireless AP mode and click Next.
3.
If you want, you can select an Encryption type and enter a
network security key.
4. Click Save and Reboot.
5. Wait until the repeater has rebooted.
Now you need to make sure the SSID (network name) is set
correctly in the Wireless Basic Settings of the tool.
6. In the menu, click the folder Wireless, then Basic Settings.
V. 01 – 22/08/2013
WIFIR3
14 ©Velleman nv