Villeroy & Boch ProDetect 2 Mode D'emploi page 75

Fault diagnosis
Fault
Water discharge has
been detected
S. 75
Possible cause
Hoses are leaking
Fault rectification
Make sure that the connection spi-
•
got has been pushed into the water
connection adequately and is pro-
perly sealed.
Make sure that the seals and the
•
sieve seal on the inlet and outlet
of the solenoid valve have been
mounted in the correct position.
Make sure that the two union nuts
•
on the inlet and outlet of the so-
lenoid valve are tightened adequa-
tely and properly.
Make sure that the hose connec-
•
tions are screwed into the connec-
tion spigot adequately.
Make sure that the seal ring on the
•
connection spigot is fitted correct-
ly.