Maintenance And Care - SPEED+GO MPS 3600 Mode D'emploi

Anleitung MPS 3600 17042003
4. The lamp can now be removed. Take care not to
destroy the reflector.
5. To install the new lamp, proceed in reverse
order.

10 Maintenance and care

¼
Be sure to switch off the energy station and
disconnect all cables from the unit whenever you
perform any cleaning or maintenance work.
¼
As far as possible, use only a soft dry cloth
without any aggressive solvents to clean the
surface. If absolutely necessary, use a slightly
dampened rag to remove dirt.
11. Repairs
If the station ever develops a fault, contact only an
authorized specialist or Customer Service Center to
have it checked.
22.04.2003 12:41 Uhr Seite 11
GB
11