Trouble Shooting - LEXMAN 20VBA2-50.1 Mode D'emploi

FR

6. TROUBLE SHOOTING

ES
PT
IT
Four red lights
EL
flickered on and
off during the
PL
operation
RU
KZ
UA
Four red lights
RO
on for
seconds during
BR
the operation
EN
Four red lights
flashed in turn
during
operation
When pressing
the
button or in the
operation, four
lights not on
242
Over-current
protection
Short circuit /
ten
Fuse broken
Temperature
out of working
the
range
light
Battery pack
broken
Release the switch of the tool, wait
for 3 seconds and restart. If the four
LED are the same, stop the tool,
remove the battery pack from the
tool, wait for 60 seconds to charge,
put on charge during at least 5 min.
After charging, re insert the battery
pack to the tool and restart.
If the four LED are the same, stop the
tool, remove the battery pack from
the tool and contact an authorized
service center.
Stop the tool, remove the battery
pack from the tool, wait for
60 seconds to charge, put on
charge during at least 5 min. After
charging, reinsert the battery pack
to the tool and restart. If the four
LED are still the same, stop the
tool, remove the battery pack from
the tool and contact an authorized
service center.
Stop the tool, remove the battery
pack from the tool, wait for
15 minutes to cool.
Contact an authorized service center