The Kerdi-Board-Nlt Niche Set; Overall System - Schulter Systems KERDI-BOARD-NLT Mode D'emploi

LIPROTEC-P Operating Instructions
3

The KERDI-BOARD-NLT niche set

3.1 Overall system

The Schlüter -KERDI-BOARD-NLT niche set can be used to produce accent lighting accord-
®
ing to the plug-and-play principle. The system is suitable for use in areas where humidity is
high at times. The pre-assembled power supply can be plugged into sockets that are already
installed. It supplies the connected LED modules with a voltage of 24 V.
The connected LED modules can be supplied with voltage at the 24 V output of the pow-
er supply by means of pre-assembled cables and distributors. A pre-assembled Bluetooth
receiver that can be integrated in the supply lines makes it possible for the connected LED
modules to be switched on and off and for preset lighting properties to be selected using the
associated radio remote control. The receiver is optional and must be purchased separately.
The lighting properties can also be adjusted individually using the Schlüter
CONTROL app on a mobile device.
EN
LED-COLOR-
®
55