dji TAKYON Z14120 Guide De Démarrage Rapide page 4

4. Be sure to use the product in strict accordance with the specifications
(voltage, current, temperature, etc.) listed in this document. Failure to
do so may result in permanent damage to the product.
5. Ensure that there are no open circuits or short circuits when soldering
the power cables.
6. Before takeoff, ensure that the propellers and motors are installed correctly.
7. Ensure that all parts of the aircraft are in good condition. DO NOT fly
with worn or damaged parts.
8. Ensure that all parts are firmly in place and all screws are tight before
each flight.
Legend
Important
Profile
The Takyon Z14120 Electronic Speed Controller (ESC) is designed for
applications where high power and high reliability is of importance. Its
exterior (IP66 rated, IEC standard 60529) is sealed against dust and liquid
in order to prevent corrosion, while excellent heat dissipation capabilities
enable it to function stably during highly intensive periods of work. The
Active Protection functions extend the life of the ESC and prevent damage
from misuse, with a voice prompt from the motor connected to the ESC
notifying users if a fault occurs. The ESC's data cable also works as a
backup throttle signal transmission cable for increased reliability and a
safer flight, when used together with the DJI N3 or A3 flight controllers.
Features
Active Braking Function
Adjustable Output PWM Frequency
Reference
© 2017 DJI All Rights Reserved.
3