Positionnez Le Panneau Fixe; Position The Fixed Panel - Fleurco P009 Guide D'installation

Table des Matières

Publicité

GUIDE D'INSTALLATION • INSTRUCTION MANUAL
7

POSITIONNEz LE PANNEAU FIxE.

7A.
nsérez l'autre partie du joint magnétique (#6)
Au préalable, i
sur le panneau fixe à l'aide du maillet et positionez le profilé
"U" en aluminium (#5) en dessous.
First, insert the other magnetic gasket (#6) onto the fixed panel
using the mallet and position the aluminium "U" (#5) underneath
7B. Glissez le panneau fixe sur le jambage.
Slide the fixed panel over the wall jamb.
7C. Ajustez et nivelez les panneaux. Les joints magnétiques
doivent être allignés et en contact.
Adjust and level the glass panels. The magnetic gaskets
must be alligned and in contact.
7B
6
5
7A
/

POSITION THE FIxED PANEL.

.
SI PLuS d'aJuSTemeNTS SoNT requIS, INSérez d'auTreS
6
7C
BLoCS À NIVeau (#13&14) daNS Le ProFILé "u".
IF MORe ADJUSTMeNTS ARe NeeDeD, INSeRT OTHeR
SeTTING BLOCkS (#13&14) IN THe "U" CHANNeL.
10

Publicité

Table des Matières
loading

Table des Matières