Télécharger Imprimer la page

Kettler Toys THUNDER Instructions De Montage page 3

Publicité

Les langues disponibles

Les langues disponibles

USA
ginning work. Assemble the vehicle in the exact sequence shown by the letters in the diagrams. This is essential for the
safe function and use of the scooter.
■ Please note that there is always a danger of injury when working with tools or doing manual work. Therefore please
be careful when assembling this scooter.
■ Ensure that your working area is free of possible sources of danger, for example don't leave any tools lying around.
Always dispose packaging material in such a way that it may not cause any danger. There is always a risk of suf-
focation if children play with plastic bags!
■ Bolt all the parts together loosely at first, and check that they have been assembled correctly. Tighten the locknuts by
hand until resistance is felt, then use wrench to finally tighten nuts completely against resistance (lock-
ing device). Then check that all screw connections have been tightened firmly. Attention: once locknuts have been
unscrewed they no longer function correctly (the locking device is destroyed), and must be replaced.
■ The grips can be pushed onto the handlebars more easily if they are first soaked in warm water.
■ Please keep original packaging of this article, so that it may be used for transport at a later date, if necessary.
Goods may only be returned after prior arrangement and in (internal) packaging, which is safe for transporta-
tion, in the original box if possible. It is important to provide a detailed defect description / damage report!
■ For technical reasons, we reserve the right to carry out preliminary assembly work (e.g. addition of tubing plugs).
■ When ordering spare parts, always state the full item number, spare-part number, the quantity required and the seri-
al number of the product.
Example order: item # 08451-199 / spare part no. 12802003 / 1 piece/ S/N ...
Important: spare part prices do not include fastening material; if fastening material (bolts, nuts, washers etc.)
is required, this should be clearly stated on the order by adding the words „with fastening material".
KETTLER
limited warranty
®
THERE ARE NO WARRANTIES, EXPRESSED OR IMPLIED, MADE BY EITHER THE DISTRIBUTOR OR THE
MANUFACTURER ON KETTLER PRODUCTS, EXCEPT THE MANUFACTURER'S LIMITED WARRANTY
AGAINST DEFECTS IN MATERIAL SET OUT BELOW:
®
This KETTLER
Limited Warranty applies to products sold through the KETTLER
work to the original retail purchaser and authenticated by proof of purchase from a retailer located in the
United States. Any shipments made under this warranty will be shipped to the United States only. Any
shipment outside of the United States will be at the sole cost of the customer. This KETTLER
ranty is a manufacturer's warranty and is not changed or modified by additional warranties extended by
individual retailers at the point of sale. Manufacturer warrants this product to be free from defects in ma-
terial at the time of the product's tender of delivery for a period of 3 years for residential use and 1 year
for non-residential use. This Limited Warranty is not transferable and does not cover normal wear and
tear (including, but not limited to, damage and wear to tires, power shocks, drive belts and other non-du-
rable parts). The liability of the manufacturer under this Limited Warranty shall not include any liability
for direct, indirect, or consequential damages resulting from the defect. This Limited Warranty is void if
the product is damaged by accident, unreasonable use, improper service, failure to follow instructions
provided, modification from its original state, or other causes determined not arising out of defects in ma-
terial.
This warranty gives you specific legal rights. Should this product become defective due to material within
the warranty period, contact KETTLER
757.563.9273, or e-mail at parts@kettlerusa.com.
THIS LIMTIED WARRANTY IS EXPRESSLY IN LIEU OF ANY OTHER WARRANTIES, EXPRESSED OR IM-
PLIED, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE, AND OF ANY OTHER OBLIGATIONS OR LIABILITY ON THE PART OF THE MANUFACTURER.
®
KETTLER
NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT ANY OT-
HER LIABILITY IN CONNECTION WITH SUCH PRODUCTS.
KETTLER ® International Inc., 1355 London Bridge Road · Virginia Beach, VA 23453
For parts or service ONLY call 1-866-804-0440 or send e-mail to:
parts@kettlerusa.com
call (866) 804-0440 fax (757) 563-9273.
www.kettlerusa.com
info@kettlerusa.com
The manufacturer reserves the right to make changes reflecting product or other tech-
nical advances. The content of these instructions is accurate at the date of printing.
®
Parts & Service Dept. by phone at 866.804.0440, fax at
®
Authorized Dealer Net-
®
Limited War-
3

Publicité

loading

Produits Connexes pour Kettler Toys THUNDER

Ce manuel est également adapté pour:

08451-199