Declaration Of Conformity - Pentruder RS2 Manuel D'utilisation

Manuel d'utilisation de la scie murale Pentruder RS2 et du générateur Pentpak 3 HFi - Instructions d'origine - Projet

Declaration of Conformity

According to the Machinery Directive 2006/42/EC, annex A1
The Manufacturer:
Person authorized to compile the technical file:
Hereby declare that the machine:
Category:
Make:
Type
Drive system:
Type:
Accessories:
Is in conformity with the provisions of the Machinery Directive 2006/42/EC.
Is in conformity with the provisions of the following other EC-directives:
•
Low Voltage Directive 2014/35/EU
•
Electromagnetic Compatibility Directive 2014/30/EU
•
Radio Equipment Directive 2014/53/EU
In accordance with the EC-declaration of conformity, the product must not be modified without the manufacturer's
permission. If this occurs, this documented EC-declaration ceases to apply and the modifier is considered to be the
manufacturer and must verify and draw up an addendum to the EC-declaration and file technical data for the
inspection authority.
st
Borlänge 1 of March 2021
Anders Johnsen
Technical Director
Tractive AB
Gjutargatan 54
78170 Borlänge
Sweden
Anders Johnsen
Gjutargatan 54
78170 Borlänge
Sweden
Wall saw
Pentruder
RS2
HFi power pack
Pentpak 3
As stated in this Operator's manual.
Page 39