Work Smart EC6582 Instructions De Montage

CHAISE ECO EN CUIR AVEC DOSSIER HAUTE
éTAPE 1
4
3
1
2
éTAPE 3
9
5
6
Enlever toutes les pièces du carton, les organiser selon les numéros de pièce indiqués
sur la liste et vérifier les quantités des pièces.
éTAPE 1 Insérer les cinq roulettes (2) dans la base (1). Pousser fermement jusqu'à ce que les roulettes (2) s'encliquettent. Insérer le vérin pneumatique (3) dans la
base (1). Glisser le soufflet (4) sur le vérin pneumatique (3).
éTAPE 2 ÉTAPE 2 Alignez les trous de bras (8L & 8R) avec les trous du coussin de siège (6) et le coussin a dos (7), fixez les bras (8L & 8R) en utilisant quatre vis
(9) pour chaque bras, SERREZ TOUTES LES VIS COMPLèTEMENT. Couvrez les trous dans les bras (8) en utilisant huit casquettes en plastique (10),
SERRER COMPLèTEMENT TOUTES LES VIS.
éTAPE 3 ÉTAPE 3 Attachez la Plaque du siège (5) au coussin de siège (6) avec la flèche vers l'avant de la chaise, en utilisant quatre vis (9),
SERRER COMPLèTEMENT TOUTES LES VIS.
éTAPE 4 Placer le siège assemblé sur le dessus du vérin pneumatique (3) et pousser vers le bas.
ATTENTION: AVANT D'UTILISER LE FAUTEUIL, S'ASSURER D'AVOIR SERRé COMPLèTEMENT TOUTES LES VIS.
EC531
INSTRUCTIONS DE MONTAGE
éTAPE 2
7
8R
9,10
éTAPE 4
PIèCE
1. Base . . . . . . . . . . . . . . . . . . . . . . . 1
2. Roulettes . . . . . . . . . . . . . . . . . . . . 5
3. Vérin pneumatique . . . . . . . . . . . . 1
4. Soufflet . . . . . . . . . . . . . . . . . . . . . 1
5. Mécanisme . . . . . . . . . . . . . . . . . . 1
6. Coussin Du Siège . . . . . . . . . . . . . 1
7. Coussin arrière . . . . . . . . . . . . . . . 1
8. Bras (8L) Right (8R) . . . . . . . . . . . 2
9. Vis . . . . . . . . . . . . . . . . . . . . . . . . 12
3
10. Casquettes en Plastique . . . . . . . 8
11. Clé Allen (non montrée) . . . . . . . . 1
© Office Star Products Septembre 2008
8L
9,10
1
6
EC6582
QTé
LIMITED WARRANTy
Work Smart chairs are warranted from the date of purchase against failure due to material and workmanship as follows:
• 15 Years on all non-moving metal parts.
• 5 Years on component parts including Control mechanisms, pneumatic cylinders, wood, plastic parts, base and casters.
• 3 Years on upholstery fabric and foam against wear and deterioration.
• We cannot warrant leather against routine scratching and scuffing, as all leather is subject to minor blemishes in use.
To make a warranty claim, contact Parts Department. Provide model number, proof of purchase, description of the problem and
obtain return authorization. At it's option Office Star Products will:
(a) Supply compatible components of current manufacture.
(b) Repair the customer's component. The customer must prepay freight on any components returned to the factory. Return
freight on components still in warranty will be paid by Office Star Products.
*All warranties are limited to the original purchaser for normal commercial usage defined as a standard forty hour work week by persons weighing 250 lbs. or
less. This warranty will not cover labor, freight or damage from misuse, abuse, negligence, alteration, accident, vandalism, rusting, acts of nature or any other
event beyond the control of Office Star Products. The warranty does not cover cosmetic damage that may result from normal use. Liability for incidental or
consequential damages is excluded. The user assumes all risk of injury resulting from use of this product. When usage is more than 40 hours per week, a two
year warranty on all parts applies. Fabric and foam is warranted for one year. This warranty gives you specific legal rights, and you may also have other rights
which vary from state to state.
Our quality standards are among the highest in the industry. Sometimes, no matter how hard we try, there are times when parts
are damaged or missing. Our Parts Department will do everything possible to promptly remedy the problem. Contact us via e-mail
parts@officestar.net, by Fax 1-909-930-5629, or toll free parts number 1-800-950-7262, Monday through Friday 8:00 a.m. - 5:00
p.m. Pacific Time.
EC6582/EC6583
HIGH BACK ECO LEATHER CHAIR
OPERATING INSTRUCTIONS
FEATURE
• PNEUMATIC SEAT HEIGHT ADJUSTMENT
NOTE: It is normal for chair to slightly lower under
body weight.
• LOCKING TILT ADJUSTMENT
NOTE: Be careful not to loosen the back tilt adjustment
2
WARNING
1. Use this product only one person at a time.
2. Do not use this chair unless all bolts screws
3. Check that all bolts screws and knobs are
4. Do not overturn back tilt knob when
5. Dispose of packing material properly. Do not
1
2
6. Do not use chair as a stepladder.
7. Use this chair for its intended purpose only.
8. Use mild detergent only for cleaning.
EC6583
To raise seat remove pressure from seat and lift
lever (1). To lower seat height sit on chair and
lift lever (1).
For individual comfort, this chair has been equipped
with an adjustment that will allow the user to change
the tension of the tilting feature. Turn knob (2) clockwise
to increase tension and counter-clockwise to decrease
or ease the tension. To lock return chair to the upright
position and push lever (1) in. To unlock pull lever (1) out.
knob completely.
and knobs are securely tightened.
tight every three months or as needed.
decreasing tension.
use plastic cover as head covering. It may
cause suffocation.